|
|
WTEM-1D 10KW Large
Power Transmitter
The instrument is a special large power transmitter for TEM
explorations, which could be used together with the WTEM-1J/GPS
TEM exploration system receiver. It has high transmitting voltage,
large transmitting power, short switch-off time, under full transmitting
power condition, it can work more than 8 hours continuously, and
can be applied to overlap loop, centered loop, large loop.
Technical specifications
□ Transmitting voltage: 200V
□ Transmitting current: 50A
□ Current measurement precision: 1%
□ Power supply frequencies: 0.0625Hz, 0.125 Hz, 0.25 Hz, 0.5
Hz, 1 Hz, 2 Hz, 4 Hz, 8 Hz, 16 Hz, 32 Hz.
□ Transmitting wave: equal width and dual polarity, +ON, OFF,
-ON, OFF.
□ Switch-off time measurement range: 1μs~1000μs
□ Switch-off time: ≤1.2μs (pure resistance), changed with the
transmitting current and transmitting loop when connected to
loops
□ Transmitting loop: 0.1kmx0.1km to 2kmx2km for a single cycle.
□ Synchronization mode: (cable, quartz clock, GPS)
□ Transmitting power voltage display: liquid crystal display
unit V, display resolution 0.1 V.
□ LED index: power switch-on, positive supply, negative supply,
over-power, over-heat, internal voltage shortage
□ Data storage: capable of data saving of month, date, hour,
minute, transmitting current, switch-off time to storage by
setting interval. No more than 8000 data points.
□ RS-232 standard serial port: transfer the data (month, date,
hour, minute, transmitting current, switch-off time) to computer
for later processing
□ Power: built-in 12V rechargeable battery (support outside
power), working time>10 hours
□ Dimensions: 525mmx436mmx217mm
□ Weight: 18.5kg
□ Working temperature :-10℃~50℃
□ Storage temperature:-20℃~+70℃
|
|