WTEM-1J/GPS TEM exploration system receiver

  The receiver could be applied together with the large power transmitter WTEM-1D for deep exploration. It could be applied together with small power transmitter WTEM-1X for shallow exploration. Chinese packet PC and Blue-tooth wireless communication technique is used, and it is operated very easily. Advanced hardware and software design made it a strong anti-interfere and fitted for all kinds of environments.
 

瞬变电磁勘探系统接收机

Technical specifications

    □ Channel number: 1
    □ Pre-amplifier gain: 8,32 times
    □ Main amplifier gain: 1,2,4,8,16,32,64,128 times
    □ Band pass: 0~50kHz (liner phased filter), full band 0~400kHz.
    □ A/D bit: 16 bit
    □ The minimum sample interval: 1μs
    □ Crystal oscillation total error: ≤5x10-9
    □ Trace number: 50
    □ Stack number: 1~9999
    □ Synchronization mode: (1) cable synchronization (2) GPS synchronization
    □ Power supply: built-in 12V rechargeable battery (support outside power), working time>10 hours
    □ Pocket PC: pocket PC 2003 system, 320x240 real-color, 64MB Flash Rom/ 64MB SDRAM, CF card, store more than 100000 sampling points. Blue-tooth, infrared, serial port.
    □ Dimensions (L×W×H): 340 mm×260 mm×140 mm
    □ Weight: 6kg
    □ Working temperature :-10℃~50℃
Copyright© 2005 Chongqing benteng digital control technology institute Inc. All rights reserved.

Information request send us Email